Adygil Round Sinker Mold with 5 Cavities and 3.5-Ounce,without Handle

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould. 5.

Adygil DIY Fishing Snapper Sinker Mould ADSNSM/Large Combo Snapper Sinker 112g 224g 336g 5 Cavities

Bank Sinker Mould With 5 Cavities and 1,2,3-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when

Bank Sinker Mold with 5 Cavities and 1,2.3-Ounce,Without Handle

Round Sinker Mold With 5 Cavities and 3.5-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when

Round Sinker Mold With 5 Cavities and 3.5-Ounce,without handle

Adygil Bank Sinker Mold with 3 Cavities and 4.5.6-Ounce,Without Handle : Sports & Outdoors

Adygil Round Sinker Mold with 6 Cavities and 1.5-Once,Without Handle : Sports & Outdoors

Adygil Round Sinker Mold with 8 Cavities and 1/3-Ounce,Without Handle : Sports & Outdoors

Best Sellers: The best items in Fishing Sinkers & Weights based on customer purchases

Adygil Bank Sinker Mold with 5 Cavities and 1,2.3-Ounce,Without Handle : Sports & Outdoors

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Bean Sinker Mold with 5 Cavities and 1-Ounce, Without Handle

Adygil DIY Fishing Snapper Sinker Mould ADSNSM/Large Combo Snapper Sinker 112g 224g 336g 5 Cavities