Prime-Line Sprng Garag Dr Gr 120Pul GD12192
5 (590) In stock
Prime-Line Garage Door Torsion Spring, 0.243 in. x 2 in. x 32 in., Yellow, Right Hand Wind GD 12232 - The Home Depot
Prime-Line 25 in. L 120 lb Garage Door Spring - Ritter Lumber
Prime-Line GD 12234 Garage Door Torsion Spring, 32 in, Green : Tools & Home Improvement
Brush Holders & Springs Stock List
Propylene, FG, Industrial (I), 99.0%, 903 lbs, Low Pressure Steel (LPS), CGA 510
Most doors in recent years have been supplied with torsion springs that is located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods GD-52238 and a clear understanding of wire size and handing. Requires the use of 2 winding rods for replacement. Requires the use of 2 winding rods for replacement. Winding cone and anchor cone attached.
Prime Line Yellow Right Hand Torsion Spring GD 12232
Prime-Line GD 12228 Garage Door Torsion Spring, 0.243 in. x 1.75 in. x 32 in., Red Painted End, Right-Hand Wind (Single Pack) : Tools & Home Improvement
Prime-Line GD 12192 120 lb., Green Tip, Sectional Garage Door Extension Spring with Safety Cable (Single Pack) - Garage Door Hardware
Prime-Line GD 12322 Garage Door Torsion Spring, 0.250 in. x 2 in. x 28 in., Gold Painted End, Left-Hand Wind (Single Pack) : Tools & Home Improvement
This torsion spring requires the use of two winding rods. It comes in a blue finish with a .218 wire size and a 1-3/4 In. inside diameter. It features a right handed wind with and 20 In. length.
Prime Line Gd12226 Spring Torsion, 20 inch
This is a left hand wind torsion spring. In recent years most doors are being supplied with torsion springs located directly above the door and mounted to the header. Replacement will require the use of 2 winding rods, sold separately. To wind the torsion spring correctly you will need a clear understanding of wire size and handing. It is always best to replace both springs at the same time.
Prime-Line 32 in. L Garage Door Torsion Spring